EUROM Force 3000 IND, Instruction Manual

Page: 49 / 68

49
Problem Cause Solution
The machine
vibrates - Air in the water supply
hose
-
Problems in the water
provisioning
-
Nozzle is partly blocked
- Water inlet filter is dirty
- Hose is kinked
- Let the air escape by
running water through the
switched off machine.
- Use water supply provision
that complies with the
requirements. Do not use a
hose that is too long or too
thin (min. ½”)
- Clean the nozzle
- Clean the filter
- Keep the hose straight
The machine
starts but does
not deliver water - Pump, hose or accessories
are frozen
- No water supply
- Filter is blocked
- Nozzle is blocked
- Let the pump, hose and
accessories defrost and
check them
- Provide water
- Clean the filter
- Clean the nozzle
The machine
starts and stops
regularly by itself - Pump or spray gun leak - Have the pump or spray
gun repaired or replaced
The fuse is blown - The electrical system is
too weak - Connect the machine to a
heavy-duty electrical
system. Do not use an
extension cable.
In case of other problems, contact your dealer!
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.