EUROM 340075, Instruction Manual

Page: 29 / 80

29
the socket immediately. Take the entire device back to your
supplier or a recognised electrician to be checked and/or repaired.
Always ask for original parts to be used.
4. The device may only be opened and/or repaired by a competent
and qualified person. Do not carry our your own repairs as this
could be dangerous! Repairs carried out by unauthorised persons or
changes made to the device could damage the dust/waterproof
capacity of the device and will nullify the guarantee and the
manufacturer’s liability.
5. If the electrical cable is damaged, it must be replaced by the
manufacturer, their service department or somebody with similar
qualifications in order to prevent creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or
personal injury. They will invalidate the guarantee and the supplier,
importer and/or manufacturer shall not be liable for the consequences.
Description
1.
Control panel
2. casing
3. hot air outlet grille
4. adjustment knobs
5. frame
6. cord with plug
7. handle
By loosening the adjustment knobs (4), the heater can be tilted in its frame so that
the blow direction can be adjusted. Do not point it downwards onto flammable or
heat sensitive floors! For safety reasons, the tilt is limited. Re-tighten the knobs
before using the heater again!
The control panel consists of two dials: