15
6.
Connect the heating cap (Figure 6, pos. 1) to
the adjustable tube (Figure 6, pos. 2) with
two small screws (Figure 6, pos. 4) using a
Phillips screwdriver (Figure 6, pos 3).
Figure 6
7.
Loosen the adjustment knob and slide the
inner tube (Figure 7, pos. 3) out of the
adjustable tube until a hole can be seen.
8.
Place a small screw (Figure 7, pos. 2) in the
hole and tighten it with a Phillips screwdriver
(Figure 7, pos. 1)
Figure 7
9.
Fix the power cable (Figure 8, pos. 1) to the
base with the two plastic fittings (Figure 8,
pos. 4) and 4 screws (Figure 8, pos. 3) with a
Phillips screwdriver (Figure 8, pos. 2).
Figure 8
