45
on the battery charger remains constantly on. The battery has now been
charged in full.
- Remove the plug of the battery charger from the socket.
- Press the security button on the battery and slide the battery from the battery
charger. The battery can now be placed in the weed cleaner.
To check the charging level of the battery, press the button on
the battery (on the short side of the battery, alongside the red
lights).
Placing the battery in the weed cleaner
- Check if the on/off switch is set to off (0) before you place
a battery in the weed cleaner.
- Slide the battery delivered with the weed cleaner in the weed cleaner until you
hear a click. Do not force it to prevent damage to the battery and/or weed
cleaner.
Removing the battery from the weed
cleaner
- Press the security button on the batter
and slide the battery from the battery
charger.
Use of the weed brush
Your weed brush has been designed to remove weeds from between bricks and
paving.
It is not designed to be used on tiled surfaces. Only use the weed brush for this
purpose. Anything else is considered to be inappropriate usage and will nullify the
guarantee. The weed brush is supplied with 2 nylon brushes.
- Always start with a test on a small section of the surface to be cleaned, in order
to check the impact on the bricks/paving.
• Do not use the weed brush on delicate paving.
• Do not use damaged or worn brushes.
- Hold the weed brush with both hands.
- Make sure that the brush is not touching any stones or dirt before you start the
electrical device.
- Slide the ON/OFF switch forwards and squeeze the handle.
