INSTRUCTIONS FOR USE
8
- GB
Programming end of cooking
To start cooking immediately and automatically set the duration, proceed as
follows:
•
select the function and the temperature desired using the function selector and
the thermostat
•
press button (2) and set the cooking time, pressing the (-) and (+) buttons within
4 seconds.
The current time will reappear and the (A) and (AUTO) lights will stay on. The
remaining cooking time can be checked by pressing button (2), or changed by
repeating the same procedure.
For any cancellation of the programming set, reset the cooking time to 0.00 and,
after the current time has reappeared, press button (4) to restore the manual
function. When cooking is finished, the buzzer sounds and the oven is switched off
automatically.
To deactivate the buzzer, press any of the buttons from (1) to (4). To return the
programmer to the manual function, press button (4).
Setting the start and end of cooking
To programme both the start and the end of cooking, proceed as follows:
•
select the function and the temperature desired using the function selector and
the thermostat
•
press button (2) and set the cooking time, pressing the buttons (-) and (+) within
4 seconds
•
press button (3) and set the time when you want the cooking to end in the same
way.
The current time will reappear and light (AUTO) and, when cooking starts, light (A),
will stay on. To cancel the programming set, put the cooking time back to 0.00 and,
after the current time has reappeared, press button (4) to restore the manual
function. When the cooking ends, the buzzer sounds and the oven is automatically
switched off. To deactivate the buzzer, press any of the buttons from (1) to (4). To
restore the programmer to the manual function, press button (4).
Children’s safety lock
The programmer has a safety lock which prevents programming cooking and
therefore the oven from functioning.
Activating the lock:
−
press buttons (1) and (2) at the same time for about 8 seconds
−
the display shows “ON”; release the buttons
−
press the (+) button; the display shows “OF” and the “…key…” symbol.
At this point, the safety lock is activated and after about 5 seconds the display
shows the current time and the “…key…” symbol.
Deactivating the lock:
−
press buttons (1) and (2) simultaneously for about 8 seconds
−
the display shows “OF”; release the buttons
