pg 5
temperature has been reached. You can stop the boiling procedure at any time
by pressing the ON/OFF button.
KEEP WARM FUNCTION
• With a temperature of 212°, 200°, 190°, 185°, 175° ,160° you can keep the
water warm for kettle switches off automatically; three signal tones will
sound and LED, DISPLAY PANEL will extinguish.
• If you have set a keep-warm temperature of 212 , the water will be
kept warm within a range of 194-212° , in order to avoid excess steam
generation.
• If you have set a keep-warm temperature of 212°, 200°, 190°, 185°, 175°
,160° the water kettle will keep the temperature within a range of approx.
46.4° below/above the set temperature.
Note:
Only use the keep-warm
function if a minimum of 0.5 liters of water is in the kettle. Otherwise, the small
amount of water could boil away during the next 30 minutes and the dry-run
protection will switch the appliance off.
• If you cannot set a temperature, it is probably because the water
temperature in the kettle is still higher than the desired temperature.
• The keep-warm function can be activated before, during and directly after
boiling water.
• Memory function allows the kettle to be removed from the base without
Losing Its Preset Temp Settings at least 90s
AFTER BOILING:
1. Press the KEEP WARM button as soon as the signal tone sounds at the
end of the boiling process. The appliance will automatically select the
temperature to which you have heated the water as the keep-warm
temperature.
2. The digits on the DISPLAY PANEL of the relevant temperature will
illuminate, the KEEP WARM button will illuminate. The water will be kept
warm.
DRY-RUN PROTECTION
A dry-run protection safeguards the appliance from damage. The protection
switches on automatically if no more liquid is in the kettle.
Note:
The dry-run
protection should only be used as a safety device. It is not intended to be part of
the normal operating procedure for the appliance.
IF THE DRY-RUN PROTECTION HAS BEEN ACTIVATED:
1. Disconnect the power plug from the socket.
2. Allow the kettle to cool off. You can then fill the kettle with water again
and use as usual
