92
EN
timer LED will stop automatically after 2
minutes and/or by pressing any button.
Buzzer
While the hob is in operation, the
following activities will be signalled by
the buzzer.
• Normal button activation will be
accompanied with a short sound
signal.
• Continuous button operation over a
longer period of time (10 seconds)
will be accompanied with a longer,
intermittent sound signal.
Boost Function
To use this function, select a cooking
zone and set the desired cooking level,
then press the “P” (Boost) button.
The Boost function can only be activated
if it is applicable with the cooking zone
selected. If the Boost Function is active,
a “
P
” will be shown on the corresponding
display.
Activating the booster can exceed the
maximum power, in which case the
integrated power management will be
activated.
The necessary power reduction is
shown by the corresponding cooking
zone display blinking. Blinking will be
active for 3 seconds to allow for further
adaptations ofthe settings before power
reduction.
4.2 Accessories
The Vitroceramic Spatula
Error Codes
If there is an error, an error code will be shown on the
heater displays.
E1
Cooling Fan is disabled. Call an author-
ised service agent.
E3
Supply voltage is other than the rated
values. Switch the hob o
ff
by pressing
, wait until “
H
” disappears for all
zones, switch the hob on by pressing
and continue to use. Ifthe same error is
displayed again, call an authorised service
agent.
E4
Supply frequency is di
ff
erent from the
rated values. Switch the hob o
ff
by press-
ing
, wait until “
H
” disappears from all
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance o
ff
and on. Switch the hob on
by pressing
and continue to use. If
the same error is displayed again, call an
authorised service agent.
E5
Internal temperature of the hob is too
high, switch the hob o
ff
by pressing
and let the heaters cool down.
E6
Communication error between the touch
control and heater. Call an authorised
service agent.
E7
Coil temperature sensor is disabled. Call
an authorized service agent.
E8
Cooler temperature sensor is disabled.
Call an authorized service agent.
EA
Large Coil Saturation Error. Switch the
hob o
ff
by pressing on/o
ff
button, switch
the hob on by pressing on/o
ff
button
and continue to use. If the same error is
displayed again, call an authorised service
agent.
EC
Supply Voltage Error.Switch the hob o
ff
by
pressing on/o
ff
button, switch the hob on
by pressing on/o
ff
button and continue to
use. If the same error is displayed again,
call an authorised service agent.
C1-C8
Mcroprocessor alert. Switch the hob o
ff
by
pressing on/o
ff
button, switch the hob on
by pressing on/o
ff
button and continue to
use. If the same error is displayed again,
call an authorised service agent.
