EN
137
• The program duration may change
according to the amount of dishes,
the water temperature, the ambient
temperature and selected additional
functions.
• Values given for programmes other
than the eco programme are indicative
only
• If your model has turbidity sensor, it
has Auto program instead of Intensive
program.
• Eco programme is suitable to clean
normally soiled tableware, that for this
use, it is the most e
ffi
cient programme
in terms of its combined energy and
water consumption, and that it is used
to assess compliance with the EU
ecodesign legislation.
• Washing tableware in a household
dishwasher usually consumes less
energy and water in the use phase
than hand dishwashing when the
household dishwasher is used
according to the manufacturer’s
instructions.
• Only use powder detergent for short
programs.
• Short programs do not include drying.
• To assist drying, we recommend
slightly opening the door after a cycle
is complete.
• You can access the product database
where the model information is stored
by reading the QR code on the energy
label.
NOTE:
According to regulations
1016/2010 and 1059/2010, Eco
program energy consumption values
may di
ff
er. This table is in line with regu-
lations 2019/2022 and 2017/2022.
6. THE CONTROL PANEL
P
1
2
3
4
5
6
8 7
1.
On/O
ff
touch button
2.
Programme touch button
3.
Display
4.
Delay touch button
5.
Extra Dry touch button
6.
Half Load touch button
7.
Salt lack warning indicator
8.
Rinse Aid lack warning indicator
6.1 On/Off Touch Button
Switch the machine on by pressing On /
O
ff
button. When machine is on, "
--
" will
be shown on the Display
(3)
.
6.2 Programme Touch Button
Select a suitable programme for your
dishes by pressing Program Selection
button. The programme will start auto-
matically when the door is closed.
6.3 Display
The Display shows the number and to-
tal time of the selected programme al-
ternately and the remaining time during
operation.
6.4 Delay Touch Button
Press the Delay button to delay the start
time of the selected programme for 1
hour up to 19 hours. Pressing the button
once delays the start time for 1 hour, and
