• Fitting:
Polycarbonate & ABS
• Lamp type:
B278W, B278B: Including 1 x 8W Integrated LED
B279W, B279B: Including 1 x 15W Integrated LED
The light source of this luminaire is not replaceable. When the light source reaches its end of
life the whole luminaire should be replaced, or the light source should only be replaced by the
manufacturer.
• Voltage:
230V-50Hz
• Protection against electric shock:
Class 2. Double insulated. Does not require earthing
• IP Rating:
65
•
Commercial use
•
Suitable for outdoor use.
• Maximum Ambient temperature range:
20ºC - 40ºC
• Dimensions:
B278W, B278B: (Ø)140mm x (D)58mm
B279W, B279B: (Ø)180mm x (D)66mm
• Maximum Projected Area:
B278 = 0.017m
²
B279 = 0.009m
²
• Weight:
B278 = 0.028kg
B279 = 0.186kg
B278B / B278W / B279B / B279W - attachments:
If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualified electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certificate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate your
warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire must
not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
Switch the power off before commencing with the installation.
1. Connect Wire as shown in Diagram. Connect the blue/brown wires to the L and N position
2. Use the screws, fix the fitting base to the mounting surface as shown on Diagram.
3. Mount the upper cover and fix it in place with the screws.
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
• Do not insert your fingers or any part of your body into the electrical contact and sockets of
this product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
