www.eurolube.com
EUROLUBE EQUIPMENT AB
part no 53419
DaLLaS KEY rEaDEr
in
S
ta
L
L
at
io
n
g
u
iD
E
2
0
10
-0
6
1
General
The Dallas key reader kit is used to make it possible for a LUBE-Master keypad to
read a Dallas key also called Dallas iButton®.
The iButton® (also known as the Dallas Key) is a mechanical packaging standard
that places a 1-Wire component inside a small stainless steel ”button” similar to a
disk-shaped battery. iButtons are connected to 1-Wire bus systems by means of
sockets with contacts which touch the ”lid” and ”base” of the canister. The connec-
tion can be fleeting, comparable to a thumb being scanned by a fingerprint reader.
Connectors:
1 x 2-pin connector
1 x 16-pin connector
Other:
Reads the fixed serial number of a Dallas key (iButton®)
Mounting:
Chassis, Ø9,5mm hole
tECHniCaL SpECiFiCationS
NOTE!
The Dallas key reader requires a Keypad software version of at least KP10010RC12!
It this is not done, open the LUBE-Master CD that came with the PC Software & Interface, locate the folder ”EXTRA”, then ”Be-
tas” then ”BetaAll”. When the latest BetaAll files have been installed the keypads can be flashed with the latest software.
