Eurolube Equipment E80 Series Service Manual Download Page 1

www.eurolube.com

205128

  EUROLUBE EQUIPMENT 

PART NO 15740, 15741 & 15742 / ART.NR. 15740, 15741 & 15742

E80-sERiEs 15:1 OiL PUMP

SER

V

IC

E G

U

ID

E

2

0

1

7

-0

4

 O
R

IG

INAL

 MA

NU
AL

1

 General

Thank you for choosing a high quality Eurolube pump. 
The 15:1 high capacity oil pump features a unique air 
motor for quiet and quick serviceability. Recommended 
for large installations with long lengths of piping supplying 
several outlets simultaneously. Please refer to the sales 
catalogue for details on accessories. Or visit our website, 
www.eurolube.com. 
A pump’s ability to deliver fluid is based on the pressure 
(bar/psi) and quantity of air supplied to the air- motor and 
the amount of material discharge (back) pressure to be 
overcome within the system.

WARNING!

 

Do NOT use solvents or other explosive fluids. 

Never point a control valve at any portion of your body or 
another person. Accidential discharge of pressure and/
or material can result in injury. Read these instruction 
carefully before installation, operation or service.

 

DO NOT EXCEED MAXIUMUM PRESSURE

 

Allmänt

Tack för att ni valde en kvalitetspump från Eurolube. Vår 
högkapacitets 15:1 oljepump kännetecknas av låg ljudnivå 
och hög driftsäkerhet. Enkel att serva och med låg under-
hållskostnad. Utmärkt till applikationer där man behöver olja 
i långa rörledningar och med flera samtidiga tappningar. För 
detaljerad information hänvisar vi till vår kompletta produkt-
katalog eller vår hemsida www.eurolube.com.
Pumpens förmåga att leverera vätska baseras på lufttryck 
(bar) och luftflöde (l/min) till luftmotor, samt mottryck som 
uppstår mellan pump och utloppsventil.

VARNING!

 

Pumparna får EJ användas för pumpning av 

bensin eller andra kemikalier. Rikta aldrig utloppsmun-
stycke mot någon kroppsdel eller någon annan person. 
Vätska kan lätt tränga in igenom hud och förorsaka skador. 
Läs dessa intruktioner innan pumpen installeras, används 
eller vid service.

ÖVERSKRID EJ MAX ARBETSTRYCK

PART NO / ART.NR

15742

15741

15740

Pump ratio / tryckförhållande

15:1

15:1

15:1

Maximum air pressure / max lufttryck

10 bar (150 psi)

10 bar (150 psi)

10 bar (150 psi)

Minimum air pressure / min lufttryck

4 bar (29 psi)

4 bar (29 psi)

4 bar (29 psi)

Delivery per minute / kapacitet per 
minut

15 l/min @ 10 bar

15 l/min @ 10 bar

15 l/min @ 10 bar

Air inlet / luftanslutning

1/4” BSP (F/Inv.)

1/4” BSP (F/Inv.)

1/4” BSP (F/Inv.)

Fluid outlet / utloppsanslutning

3/4” BSP (F/Inv.)

3/4” BSP (F/Inv.)

3/4” BSP (F/Inv.)

Fluid inlet / inloppsanslutning

3/4” BSP (F/Inv.)

Weight / vikt

4,2 kg

4,9 kg

6,5 kg

TECHNiCAL DATA / TEKNisKA DATA

MEAsUREMENTs / MÅTT

D

B

A

C

MEAsUREMENTs 
/ MÅTT

15742

15741

15740

A

710

500

1180

B

270

270

270

C

32

32

32

D

445

230

910

Summary of Contents for E80 Series







Reviews: