Operating buttons
Button
Function
MENU
Calls the menu and the next menu item and Activates a value to be modified.
▲
▲
▲
▲
Selects the next menu item and increases values when modifying.
▼
▼
▼
▼
Selects the previous menu item and decreases values when modifying.
ESC
Exits the current level and returns to the start display.
Network settings in the <NetworkSettings> menu
Indication
Parameter
Function
<IP1 Address>
xxx.xxx.xxx.xxx
Input of the IP address of node 1.
The device is separated in 2 nodes according to the Art-Net
specification. Each node uses its own IP address for unique
identification in the network. DMX outputs 1-4 are assigned to node 1
and DMX outputs 5-8 to node 2. Use the IP address ranges 2.x.x.x or
10.x.x.x according to the Art-Net specification.
<IP2 Address>
xxx.xxx.xxx.xxx
Input of the IP address of node 2.
<Subnet Mask>
255.0.0.0
Input of the subnet mask.
Leave the subnet mask at 255.0.0.0 according to the Art-Net
specification.
Configuration of the ports in the <DMXOutSettings> menu
Indication
Parameter
Function
<DMX OUT>
DMX OUT 1-8
Signal routing for DMX outputs 1-8.
Select
<DMX A>
or
<DMX B>
for signal input via one of the DMX
inputs or
<ArtNet>
for Art-Net operation. For Art-Net, set the
<Net>
,
<SubNet>
and
<Univ>
parameters according to the Art-Net
specification in the submenu.
<DMX Hold>
DMX Hold 1-8
Output behavior for DMX outputs 1-8 on loss of the DMX signal.
<Yes>
: The last correct DMX data is sent.
<No>
: There is no DMX
data output.
Device settings in the <System> menu
Indication
Function
<Firmware>
Indication to the firmware version.
<DisplayBacklight>
Display illumination.
<Yes>
: Display backlight is always on.
<No>
: Display backlight off after 30 sec.
<FactoryReset>
Rest to default settings.
Summary of Contents for Node 8
Page 1: ......
