00119586, Version 1.1
22/28
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
SoUn
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN (So0 – So16)
to select the desired show program. Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music
(
SE 00
= low,
SE 99
= high).
Automatic mode
In automatic mode, 17 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
Auto
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
(Au0 – Au16) to select the desired show program. Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SP
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 00
(slow) to
SP 99
(fast). Confirm with the
ENTER
button.
Display shutoff
Shuts off the display after about 30 seconds.
Display-setting
With this function you can to turn the display upside down.
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 148 control channels.
However, it can also be switched to a mode with 7, 13, or 22 channels if different functions are required. To
be able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1 Press the
MENU
button so many times until
Addr
is indicated in the display. Confirm with the
ENTER
button.
2 The display indicates
A***
. Use the buttons
UP
and
DOWN
to set the address. Confirm with the
ENTER
button.
3 Now the display indicates the menu item for the DMX starting address
d***
. Use the buttons
UP
and
DOWN
to set the address. Confirm with the
ENTER
button.
4
Now set the DMX channel mode. Press the MENU button repeatedly until the display shows **CH mode.
Use the
UP
and
DOWN
buttons to select the desired DMX channel mode. Press
ENTER
to confirm.
5 A dot will flash when DMX signals are being received. If no control signals are available, the display will
flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Summary of Contents for LED Super Strobe ABL
Page 1: ......