00091577.DOC, Version 1.1
25/25
Procedure:
Step 1:
Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuse-holder.
Step 3:
Install the new fuse in the fuse-holder.
Step 4:
Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
51928760 LED PSU-5A ARTNET/DMX Controller
Power supply:
100-240 V AC, 50/60 Hz ~
Power consumption:
80 W
Output voltage:
12 V AC
Number of DMX control channels:
8/450
DMX512 connection:
3-pin XLR
Fuse:
F 2 A, 250 V
Dimensions (LxWxH):
1005 x 75 x 100 mm
Weight:
2 kg
Accessories:
No.
LED Pixel Ball 360° 1m
51928761
Terminator for LED pixel ball
51928762
TPC-10 Coupler, silver
59006856
Safety bond AG-15 4x1000mm up to 15kg
58010364
MADRIX basic - software w. DMX512 output
51860346
USB-Artnet/DMX1024-PRO Interface
51860170
DMX cable XLR 3pin 3m bk Hicon
30227811
CAT-5 cable 5m
30222070
LED Pixel Ball 360° 1m:
Power supply:
12 V AC
Power consumption:
4 W
Maximum ambient temperature T
a
:
45°
Maximum housing temperature T
c
(steady state): 50°
Min.distance from flammable surfaces:
0,5 m
Min.distance to lighted object:
0.1 m
LED Type:
SMD TCL 5050
Number of LEDs:
52
Beam angle:
360°
Dimensions (LxD):
1050 x 50 mm
Weight:
0.2 kg
Please note: All information is subject to change without prior notice. 02.12.2015 ©
Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
MADRIX
®
is a trademark by inoage GmbH
