00043178.DOC, Version 1.2
20/22
After setting the desired starting address you can start operating the LED PSU-24V DC via your DMX
controller.
Outputs
The output sockets are located on the side panel. Connect your loads via the output-sockets. The LED PSU-
24V DC controller is suitable for 4 EUROLITE LED trusslights 24V DC 18 x 1W. The maximum load per
channel is 25 W. Please note that the maximum current must never be exceeded.
OPERATION
With the power switch, you can switch the device on and off. After connecting the device to the mains, the
EUROLITE LED PSU-24V DC starts running. This unit has two operating modes. It can be run DMX-
controlled or as a Stand Alone-unit.
Control Board
