00051972.DOC, Version 1.1
19/21
Internal Programs
Press the MODE button to select the internal program mode. When the display shows
P
, you can select the
desired internal program, via the UP or DOWN buttons.
Mode:
Value:
Function:
P1
Color fading
P
P2
Color switching
Speed
Press the MODE button to select the speed of the internal programs. When the display shows
S
, you can
select the desired speed, via the UP or DOWN buttons.
Mode:
Value:
Function:
S
S001 - S100
Increasing speed
Default is 50.
Sound Control
Press the MODE button until the display shows
P
to select the sound control mode. Then press the UP or
DOWN buttons until the display shows
P3
.
Mode:
Value:
Function:
P
P3
Color switching
Setting the Sound Sensitivity
You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. You can adjust the sensitivity with the rotary-control on the rearpanel.
Preset Colors
This device features pre-programmed static-color presets. Press the MODE button until the display shows
C.
You can select the desired solid color via the UP or DOWN buttons.
Mode:
Value:
Function:
C1
Warm white
C2
Cool white
C
C3
Warm and cool white
Custom Static-Color Mixing
Press the MODE button until the display shows
U
. You can then select the first desired color value via the
UP or DOWN buttons. After 1 - 2 seconds, press the UP or DOWN buttons to select the second color value.
Mode:
Value:
Function:
r000 - 100
Warm white
U
C000 - 100
Cool white
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 W/A 36x1W will respond to the controller.
Addressing
Press the MODE button until the display shows
D
. You can now set the desired address via the UP or
DOWN buttons.
