00092593, Version 1.1
14/18
Features
Impressive Flame-Light with DMX Control
•
Unbelievably realistic effect
•
Flame height 150 cm
•
Robust version
•
Two fans
•
Operable in stand-alone mode or via DMX interface
•
DMX512 control possible via any commercial DMX controller (occupies max. 6 channels)
•
3 or 6 DMX channels selectable for various applications
•
Comfortable addressing and setting via control panel with LED display and four operating buttons
•
Functions: Color intensity, auto mode, strobe, speed settings, Master/Slave
•
Equipped with 168 x 10 mm LEDs
•
Various deco-possibilities
•
IEC Power cord with safety-plug included in delivery
•
Built in fuse and on/off switch
INSTALLATION
Install the device out of the public area.
Only install the machine on scratch resistant surfaces.
This device is constructed for a standing installation only.
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
The earth has to be connected!
If the device will be directly connected with the local power supply
network, a disconnection switch with a minimum opening of 3 mm
at every pole has to be included in the permanent electrical
installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
