00054562.DOC, Version 1.2
22/26
Stand Alone-Mode
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED BRK-12 TCL, you can select up to 14 different chasers.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (P01 – P14) via the
UP or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit the STAND ALONE Mode.
Note:
Under Chasers FLOW 8 and FLOW 9 there are 2 sub-programs to choose from (1, 2). Please press
the ENTER button twice to reach the sub-programs. The desired color combinations can be selected via the
UP or DOWN buttons.
Static colors
Blackout, red-yellow-green-cyan-blue-purple-
white;
Flash 00 - 99
Dream
Seven color dreaming
Speed 00- 99
Flash 00 - 99
Meteor
Seven color flow
Speed 00- 99
Flash 00 - 99
Fade
Seven color fade
Speed 00- 99
Flash 00 - 99
Change
Seven color change
Speed 00- 99
Flash 00 - 99
Flow 1
Seven color chase in 1 direction
Speed 00- 99
Flash 00 - 99
Flow 2
Seven color chase in 2 directions
Speed 00- 99
Flash 00 - 99
Flow 3
Seven color chase relay in 1 direction
Speed 00- 99
Flash 00 - 99
Flow 4
Seven color chase relay in 2 directions
Speed 00- 99
Flash 00 - 99
Flow 5
Seven color chase from 2 sides to the middle
Speed 00- 99
Flash 00 - 99
Flow 6
Seven color chase from the middle to 2 sides
Speed 00- 99
Flash 00 - 99
Flow 7
Seven color chase
Speed 00- 99
Flash 00 - 99
Flow 8
1: BLA-RGB 2: BLA-RGB
Two color chase in 1 direction:
Blackout-red-yellow-green-cyan-blue-purple-white
Speed 00- 99
Flash 00 - 99
Flow 9
1: BLA-RGB 2: BLA-RGB
Two color chase in 2 directions:
Blackout-red-yellow-green-cyan-blue-purple-white
Speed 00- 99
Flash 00 - 99
Auto Mode
In Auto Mode the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
Press the ENTER button to select the desired frequency of the loops.
The desired frequency of the loops (Frequency = FQN 01-99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and to exit the AUTO Mode.
DMX Mode
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED BRK-12 TCL will respond to the controller.
Controlling:
After having addressed the LED BRK-12 TCL, you may now start operating it via your lighting controller.
