00068757.DOC, Version 1.0
21/24
OPERATION
After you connected the EUROLITE LED BAR-126 RGBA 10mm to the mains, the device starts running.
The LCD display lights up and you can now choose the desired settings via the buttons MODE, ENTER, UP
and DOWN.
The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.
The device has two operating modes. It can be operated in Stand Alone via LCD display with operating
buttons or in DMX-controlled mode via lighting controller.
- STAND ALONE-MODE
•
Solid Colors/Internal Programs
•
Sound Mode
•
Master/Slave Mode
- DMX MODE
Stand Alone-Mode
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED BAR-126 RGBA 10mm, you can select up to 5 different chasers.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (01 – 05) via the UP
or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit the STAND ALONE Mode.
01 = Dimming
*
R00 G00 B00 A00 F00
02 = Color change (
15 colors
)
Speed 00
Flash 00
03 = Color change (
4 colors
)
Speed 00
Flash 00
04 = Color fade (
15 colors
)
Speed 00
Flash 00
05 = Color fade (
4 colors
)
Speed 00
Flash 00
* = Not a Chaser, rather a possibility to individually set the color intensity of the singular colors. Flash setting
is valid for all colors equally, from 00 to 99, increasing.
Sound Control Mode
Press the MODE button and choose Sound Controlled Mode (SOUND).
Press the ENTER button to select the desired sensitivity.
The desired sensitivity (Sensit 00-31) can be selected via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to exit the SOUND Mode.
