EuroLite Half-Mirrorball User Manual Download Page 10

10

In order to connect the device to the mains, you have to install a power-plug.

The occupation of the connection-cables is as follows:

Cable

Pin

International

Brown

Live

L

Blue

Neutral

N

Yellow/Green

Earth

The earth has to be connected!

Connect the device to the mains with the power-plug.

If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

DANGER TO LIFE!

Before taking into operation for the first time, the installation has to be approved by an expert!

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.

The following points have to be considered during the inspection:
1)  All screws used for installing the devices or parts of the device have to be tighly connected and must not

be corroded.

2)  There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3)  Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material

abrading or damages) and must not rotate with unbalances.

4)  The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.

Maintenance and service operations are only to be carried out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Diameter:

30 cm

40 cm

50 cm

Power supply:

230 V AC, 50 Hz ~

230 V AC, 50 Hz ~

230 V AC, 50 Hz ~

Power consumption:

4 W

4 W

4 W

Rotation-speed:

approx. 2.5 RPM

approx. 2.5 RPM

approx. 2.5 RPM

Height:

17 cm

22 cm

26,5 cm

Weight:

1.7 kg

2.7 kg

4.1 kg

Please note: Every information is subject to change without prior notice.  10/00  ©

Summary of Contents for Half-Mirrorball











Reviews: