FLEXILIGHT
Safety instructions
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Keep away from heaters and other heating sources!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device
switched off until it has reached room temperature.
This device falls under protection-class III.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs from the device!
There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
Operating determinations
This device is lamp for illuminating mixers, turntables, etc. This product is only allowed to be operated
with an direct voltage of 12 V and was designed for indoor use only.
Lamps are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless,
disconnect from mains immediately. Please let the device be checked by a qualified service technician
before you operate it again. Any damages caused by liquids having entered the device are not subject
to warranty!
Do not shake the device. Avoid brute force when operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
Operate the device only after having become familiar with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp
cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers
like short-circuit, burns, electric shock, etc.
Operation
Connect the lamp with the connector port.
Cleaning and maintenance
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never
use alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Replacing the lamp
The lamp has to be replaced when it is damaged
or deformed due to the heat!
CAUTION!
Before replacing the lamp, unplug the lamp and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer’s
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for. Damages caused by non-observance are not subject to warranty.
Remove the defective lamp from the socket. Insert the new lamp.
Technical specifications
Power supply: 12 V DC
Dimensions (LxWxH): 80 x 30 x 350 mm
Weight: 0.5 kg
Power consumption: 5 W
Fitting lamp: 12 V/5 W
Please note: Every information is subject to change without prior notice. 8/00 ©
