11
•
EN
OPERATING ELEMENTS AND CONNECTIONS
No. Element
Function
1
DMX512 outputs A and B
with LED
3-pin XLR jack to connect DMX chains.
• LED lights green: DMX output active
• Single LED lights red: Short circuit or in connected line or output module
defective
• All LEDs light red: No DMX output
2
Indicator SIG IN
• Flashes green: Incoming DMX input signal
• Lights red: No incoming DMX input signal or faulty DMX signal
3
Switch SPLIT/FILTER/
BYPASS with LED
Shortly press this button to adjust the operating mode.
• LED lights green: Splitter mode with RDM function without DMX refresh
• LED lights yellow: Filter mode with DMX refresh
• LED lights red: Bypass mode without DMX refresh
Keep this button pressed for 3 seconds to adjust and confirm the DMX
failure mode. Select the mode with the switch 22/44 Hz.
• LED lights green: The most recent valid DMX value is held and output
through all DMX outputs
• LED lights red: No DMX output when there is no DMX input signal
• LED lights orange: The value 0 is output on all DMX channels
4
Switch 22/44 Hz with LED
To adjust the DMX output frequency in filter mode.
• LED lights red: DMX output at 22 Hz
• LED lights green: DMX output at 44 Hz
5
Power input
To plug in the power plug of the supplied PSU. Fasten it with the swivel nut.
6
DMX512 input
3-pin XLR plug to connect the DMX control signal.
