EuroLite Audience Blinder, User Manual

Page: 22 / 28

00126451, Version 1.0 22/28
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Mode
Display
Function
DMX mode DMX-Mode
06CH ADDR:001 6-channel mode and start address
04CH
ADDR:001 4-channel mode and start address
02CH
ADDR:001 2-channel mode and start address
Static mode STATIC
01-03
COB 1
COB 2
COB 1 + 2 together
Automatic mode AUTO 01-09 Auto program
Speed SPEED 01-09 Speed
Intensity COLOR
L:000-255 COB 1 (0-100%)
R:000-255
COB 2 (0-100%)
Dimming DIMMING 01-99 Master dimming
Slave
SLAVE
SLAVE
MODE
Slave mode
Stand-alone operation
Static mode
In the STATIC mode you can control each COB individually or together.
1 Press the MENU button so many times until STATIC is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to select either COB1 (01), COB 2 (02) or together (03). Confirm with the
ENTER button.
Automatic mode
In automatic mode, 9 show programs are available that run at an adjustable speed.
3 Press the MENU button so many times until AUTO is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
4 Press the MENU button so many times until SPEED is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Intensity
In the color mode
COLOR each of the COB LEDs can be individually adjusted for brightness. The device will
constantly emit the adjusted brightness level. Each COB LED can be controlled individually
1 Press the MENU so many times until COLOR is indicated in the display. Confirm with the ENTER button.
2 The display now shows the letter L:*** for the COB LED 1 and the corresponding brightness value. Use
the UP and DOWN buttons to set the desired brightness.
3 Confirm with the ENTER button. Now the COB LED 2 can also be set with R:***.