EuroLite ARTNET/DMX NODE 1, User Manual

Page: 20 / 24

www.eurolite.de
20
DMX Settings
1
To control light effects set them to DMX mode. RGB fixtures must be
equipped with DMX channels for controlling red, green and blue LEDs.
RGBA or RGBW fixtures must be equipped with DMX channels for
controlling red, green, blue, amber or white LEDs.
2
The DMX channel mode depends on the number of pixels the fixtures
have.
Example 1: If an RGB fixture has 6 pixels, it must be set 18-channel
mode with the following DMX protocol:
Channel DMX value Function
1 0-255 Red 1 dark bright
2 0-255 Green 1 dark bright
3 0-255 Blue 1 dark bright
V V V
16 0-255 Red 6 dark bright
17 0-255 Green 6 dark bright
18 0-255 Blue 6 dark bright
Example 2: If an RGBA fixture has 6 pixels, it must be set 24-channel
mode with the following DMX protocol:
Channel DMX value Function
1 0-255 Red 1 dark bright
2 0-255 Green 1 dark bright
3 0-255 Blue 1 dark bright
4 0-255 Amber 1 dark bright
V V V
21 0-255 Red 6 dark bright
22 0-255 Green 6 dark bright
23 0-255 Blue 6 dark bright
24 0-255 Amber 6 dark bright
3
The start address of the first fixture connected to the node must be set
to 1. The start addresses of the following units depend on the number of
DMX channels each unit occupies. For example, if each fixture occupies
20 channel, set the first unit to 1 and the following units to a multiple of 1
(21, 41, 61 etc.).