00090912, Version 1.1
27/34
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Up or Down. Press Enter in order to select the desired menu. You can change the selection by pressing Up
or Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions
provided are described in the following sections.
Default settings shaded.
Main
menu Sub menu
Function
Set
Run mode
DMX/Sound/Random/
Auto 1 - 4
DMX mode / music control / random auto
program / auto program 1 - 4
DMX address
001~ 512
DMX address setting
Channel mode
13 CH/15 CH
DMX channel mode
Invert PAN
ON/OFF
Reverse movement
Invert TILT
ON/OFF
Swap PAN-TILT
ON/OFF
PAN-TILT swap
No DMX signal
Keep/clear
Action if no DMX
Display power save
ON/OFF
Display turn off
Load default
Restore factory settings
Manu
PAN ...
PAN = XXX ...
Manual adjustment
Sys
Ver
Software version
DMX monitor
Current DMX address of the channels
System errors
Error
message
Total fixture hours
Fixture running time
Partial fixture hours
Power on running time
Advan
Only service function for producer
180°
Display reverse 180 degree
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via every standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode
With this function, you can run 4 different internal programs.
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
DMX channel mode
With this function, you can select the desired DMX channel mode.
Invert PAN
With this function you can reverse the PAN-movement.
Invert TILT
With this function you can reverse the TILT-movement.
