00057587.DOC, Version 1.0
23/27
Note:
Under Chasers FLOW 8 and FLOW 9 there are 2 sub-programs to choose from (C1, C2). Please
press the ENTER button twice to reach the sub-programs. The desired color combinations can be selected
via the UP or DOWN buttons.
1. Static
colors
Blackout, red-yellow-green-cyan-blue-purple-white;
Flash 00 - 99
2. Dream
Seven
color
dreaming
3. Meteor
Seven color flow
4. Fade
Seven color fade
5. Change
Seven color change
6. Flow 1
Seven color chase in 1 direction
7. Flow 2
Seven color chase in 2 directions
8. Flow 3
Seven color chase relay in 1 direction
9. Flow 4
Seven color chase relay in 2 directions
10. Flow 5
Seven color chase from 2 sides to the middle
11. Flow 6
Seven color chase from the middle to 2 sides
12. Flow 7
Seven color chase
13. Flow 8
C1: BLA-RGB C2: BLA-RGB
Two color chase in 1 direction:
Blackou, red-yellow-green-cyan-blue-purple-white
14. Flow 9
C1: BLA-RGB C2: BLA-RGB
Two color chase in 2 directions:
Blackout, red-yellow-green-cyan-blue-purple-white
AUTO MODE
In Auto Mode, the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
Press the ENTER button to select the desired frequency of
the loops.
The desired frequency of the loops (Frequency = FQN 01-
99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and to exit the AUTO Mode.
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the 4 x PAR-36 TCL LED Audience Blinder will respond to the controller.
Controlling:
After having addressed the 4 x PAR-36 TCL LED Audience Blinder, you may now start operating it via your
lighting controller.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
