Eurolinx X301ISL, Manual

Page: 4 / 8

AUTO POWER OFF: To activate the auto power off, first turn on
the hood and, then, push the “T1” button for a few seconds until
all LEDs start flashing. By pressing one of the buttons (T1, T2,
T3, T4) it is possible to program the auto power off time, which
will be different according to the button
pressed (T1= 5 minutes, T2=10 minutes, T3=15 minutes, T4=20
minutes). The set speed can be changed during the auto power
off time. When the auto power off option corresponds to the
previously set speed, the speed LED flashes; if the option is
different, the speed LED is fixed.
FILTER TIMER: After the hood has worked for 30 hours, all
LEDs will switch on with a fixed light for 30 seconds when the
hood is turned off indicating that the aluminium filters need to be
cleaned. The timer will reset if the T1+T4 button is pressed for a
few seconds with the exhaust fan turned off. If this button is not
pressed, the same operation will occur again once the hood is
switched off again. This operation will occur every 30 hours, until
120 functioning hours are reached. Once the hood has worked
for 120 hours and it is turned off, all the LEDs will turn on with
a flashing light for the following 30 seconds indicating the that
aluminium filters need cleaning and, if the hood is a filtering
hood, the carbon filters need to be replaced.
Once the timer has been reset (by keeping the T1+T4 button
pressed for a few seconds with the exhaust fan turned off),
the entire process will present itself again after the next 30
exhausting hours.
5 MAINTENANCE AND REMINDERS
Always disconnect the hood from the electrical power supply
before any maintenance or cleaning operation. Particular care
must be given to the grease filters, which serve to trap grease
particles entrained in cooking vapours.
The grease filters are metal, and must be washed at least once
a month with warm water and detergent (dishwasher clean is
sufficient).
Dry throughly before refitting.
ATTENTION: the grease collected in the filter can easily catch
fire and it is therefore extremely important to clean the metallic
filter on a regular basis as per instructions.
Grease filters are removed as illustrated (Fig. 7).
The function of the carbon filters is to prevent the spread of
odours present in the cooking fumes. Clean air is returned to the
kitchen. Carbon filters cannot be washed, and must be replaced
2 or 3 times a year according to the amount of use.
The hood features a LED light that, in addition to offer a good
lighting and a significant energy savings, is guaranteed to last
about 10 times more than traditional lights. For replacement,
contact the Assistance Service.
Spare filters can be purchased from dealers or direct from the
manufacturer.
Removal: detach the metal covers and rotate the carbon filters
clockwise (Fig. 8) until release from of the motor.
Refitment: position the new carbon filters and reverse the
procedure. The hood should be cleaned with a soft damp cloth
using neutral liquid detergents. Do not use solvents, petroleum
products or abrasives.
Never cook flambé dishes under the hood. Never leave the hob
unattended when frying, as oil or fat can catch fire.
THE MANUFACTURER DOES NOT ACCEPT LIABILITY
FOR ANY DAMAGE OR INSJURY CAUSED IF THE
USER FAILS TO FOLLOW THE ABOVE INSTRUCTIONS
REGARDING INSTALLATION, MAINTENANCE AND
THE PROPER USE OF THE COOKER HOOD.