background image

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. October 2012

    

 Instructions Part Number IN1263 Ed.A

2

Stoves supplied through Euroheat authorized retailers.
For England, Wales, Scotland and Northern Ireland 

Euroheat Distributors (H.B.S). Ltd.
Unit 2, 
Court Farm Business Park,
Bishops Frome, 
Worcestershire.  WR6 5AY.

www.euroheat.co.uk

  
[email protected] 

The Model Range Explained

Thank you for purchasing your stove and helping to protect our environment. Nestor Martin and Euroheat insist 
on progressive development to produce products which are market leading. Our aims are to produce stoves with 
the latest innovations, user friendly operation and high efficiency for lower cost operation.  

This operation manual offers user information for the NESTOR MARTIN IQ13 Insert stove. 

Model Identification

You will see on the front page of this document a label which confirms which model you have. This label also 
advises you of the stoves unique serial number. This information is also attached to your stove for reference. 

Important

Please ensure the warranty registration form is returned to Euroheat. In this way the model and its history will 
be recorded for reference in the future.

Whilst we are always happy to assist you, please make sure you have read this manual before requesting 
support. 
First contact your supplying retailer. If you find this not successful contact the Euroheat Technical support team. 
Technical support telephone Number 01885 491117. E-mail [email protected]. Before telephoning ensure 
you have your stove’s serial number to hand. This can be found on the front of either the operating, installation, 
warranty registration, or on the stove identification label.
Euroheat unfortunately are unable to offer support for appliances which were not supplied by Euroheat. 

HETAS 

The reference to use of smokeless coal and other fuels in these instructions may not be covered by current Hetas 
approval. For HETAS approval model information see the last page of this document. Under the HETAS approval 
scheme stoves which are listed as intermittent (see technical table at the end of this document) cannot be 
referred to as slow combustion appliances. Also see the HETAS web site www.hetas.co.uk

Stoves supplied through Eireheat authorized retailers.
For Eire

Sean Murphy Heating Ltd
Kinvara
Co Galway
Eire

www.eireheat.com
[email protected]

(091)637701  Fax: (091)637797
Interna353 91637701

For support for appliances supplied through Eireheat in Ireland please contact using the 
details listed above. 

Thermic Distribution Europe Sa
11 Rue De Lion
B-5660
Frasnes Les Couvin, Belgium.

www.nestormartin.com

Summary of Contents for Nestor Martin IQ13

































Reviews: