©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD April 2007
5
E&OE Instructions Part Number IN1190 Ed B
H11##0105A
OFTEC
QUALIFICATION
INSTALL
COMMISSION
CONTROL
DOCUMENTATION
OFT 105 Appliance
Installation Technician
Appliance
Flues & Vents
Oil Lines & Fire Valves
Tanks
Heating Systems
-
-
Oil Lines & Fire Valves
Tanks
Heating Systems
OFTEC CD/10
OFT 101 Pressure Jet
Commissioning
Technician
-
Appliances
Combustion & Safety
Flues & Vents
Oil Lines & Fire Valves
Tanks
OFTEC CD/11
OFT 102 Vaporising
Commissioning
Technician
-
Vaporising Appliances
Combustion & Safety
Flues & Vents
Oil Lines & Fire Valves
Tanks
OTEC CD/11
OFT 600A
Oil Lines & Fire Valves
Tanks
Oil Lines & Fire Valves
Tanks
OFTEC CD/10
Note: Separate qualifications are required for installations involving unvented hot water
storage covered by Advisory Document G3.
The types of work covered under the new Part J Approved Document of the England and Wales
Building Regulations are new or replacement installations of boilers, oil tanks, associated pipe
work, including the fitting of remote acting fire valves and major changes to flueing systems.
Part L1 of the Regulations, which came into force at the same time, covers the energy efficiency
aspects of heating system installation, particularly their controls and requires commissioning to
be properly undertaken and a certificate completed by a competent person.
The Building Act falls under criminal law and there is a structured fining system for those who are
found not to comply.
This is an important step which acknowledges those in the industry who work to Regulations and
Standards and will help customers recognise that OFTEC Registered Technicians have had their
competence independently assessed.
April 2002
