Eurogames Srl – Operation and maintenance handbook – Mini Car
11
“Minicar” with belt drive
Adjusting the drive belts
The adjustment of drive belt A is essential for a proper transmission of the motion to the vehicle wheels.
Every single model is fitted with an own adjustment system (see figures below) and the drive belt A can
be tensioned as needed by operating the bolts which assure the connection between motor body and
wheel axle.
MINI MOTO models
Loosen bolts 1-2-3 (fig. 6) and move the motor until the belt is properly tensioned. Re-tighten bolts 1-2-3.
MINI CAR models
Loosen bolts 8-9-10-11 (fig. 7) and move the motor until the belt is properly tensioned. Re-tighten bolts
8-9-10-11.
Fig. 6
Fig. 7
“Minicar” with direct drive
The “Minicar” models with direct drive (Fig. 8) do not need any adjustment.
Fig. 8
a
1
3
2
11
9
10
8
