Seite 1 von 5
Data Sheet
Nr. 9382 R - 0
Edition: Sept. 2016
All information without guarantee, subject to change. The installation instruction is not subject to any
change service. Each current and valid from can be recalled at www.kraiburg-relastec.com/euroflex/
Talking Mushroom
KRAIBURG Relastec GmbH & Co.KG
Fuchsberger Straße 4 · D-29410 Salzwedel
Fon +49-(0)8683-701- 199 · Fax +49-(0)8683-701-4-199
[email protected] · www.kraiburg-relastec.com/euroflex
Installation and operating guidelines
Storage of EUROFLEX® Products and adhesive cements
EUROFLEX® products should normally be stored in dry areas at constant temperature above
10°C. If stored below 10°C, store the slabs at the installation site temperature (> 10°C) for at
least 2 hours before installation.
Important note: Adhesive cements must be stored at all times in dry locations above 0°C.
To avoid colour variations due to differences in sunlight exposure, leave the UV protection
film on the products as supplied until just prior to installation.
Required Tools
Special hex-wrench (will be provided)
