Euroflex monster mop, Instruction Manual

Page: 7 / 16

7
Before Use
Be
fo
re Us
e
A. Attach Microfibre Pad
• Place Microfibre Pad on a flat surface with
Tab facing up.
• Lower Mop on to Pad and press firmly to attach.
If you are using the Heat Feature on your Monster
Mop, you must attach a Microfibre Pad to the Base.
B. Fill Tank with Liquids
Fill the Tank before plugging in your Monster Mop Cleaning System.
• Open Tank Door by grasping and pulling it
away from the Tank opening.
• Use the Fill Cup provided to SLOWLY add tap,
distilled or demineralized water and/or the
Monster brand of cleaning solution, sanitizer
or fragrance to the Tank.
• Once filled, securely close Tank Door.
*IMPORTANT*
Use tap water. Use distilled or demineralized water if tap water is too hard.
Feel free to add a small quantity of the Monster brand of cleaning solution,
sanitizer or fragrance. Follow instructions on the package.
It is NOT recommended to use other brands of cleaning solutions,
sanitizers or fragrances. In some cases other brands may include
ingredients (such as ammonia in cleaning solutions) that when heated
may cause the cleaner to produce noxious fumes.
• Place the Monster Mop Handle in the upright position.
• Insert the power cord in the opening located on the
back of the Mop Base, and press firmly in place.
• Plug other end of Power Cord in an electrical outlet.
C. Plug In Power Cord
WAIT 2 MINUTES FOR UNIT TO HEAT. AFTER
2 MINUTES, lower Handle to automatically
dampen the Microfibre Pad. Cleaning can
start once the Handle has been lowered.
!