11
8.
INSTALLATION
(SPECIALIST TECHNICIAN)
INCORRECT INSTALLATION OF THE PRODUCT CAN CAUSE INJURY TO PEOPLE OR DAMAGE
PROPERTY.
THE MANUFACTURER CANNOT BE HELD LIABLE FOR THIS.
Any variation or modification of the installation conditions must be authorised in
advance by EPTA. The operations described in this chapter must be carried out by
qualified staff.
To guarantee that people assigned to installing the product work in the appropriate safety situations, we
suggest that you carefully follow the installation procedure described here. In every case, it is
recommended to use suitable equipment or clothing:
safety shoes, safety gloves, spirit level.
We also suggest you use all the tools or protective clothing required by legislation, or by the laws in force
in the country of installation.
8.1
OPENING THE PACKAGE
The cabinet is provided in one of the following ways:
♦
Platform or pallet (fig. 1)
♦
Crate (fig. 2)
The protective wooden packaging (crate) is opened using suitable tools: it is recommended to cover
exposed parts and in particular hands, with safety gloves because wood splinters may become detached
from the packaging. It is recommended to remove the nails, starting from the top part, until the
appliance is uncovered but still attached to the pallet (packaging platform).
Therefore:
•
Remove protective cover with which the appliance is wrapped.
•
Visually check that the appliance has not been damaged during transport.
CAUTION: inside the appliance there are components that must be assembled.
Be very careful not to break or lose them during unpacking operations.
Slowly remove the protective film from the various components, without tearing it to avoid adhesive
sticking. If this should happen, remove the residues of glue using appropriate solvents.
During handling operations, it is forbidden to drag or push the display unit using the
glass.
Fig. 1
Fig. 2