Fixing the Indoor Unit
1. Hang the indoor unit on the peg board,
and move the unit from left to right to
ensure that the hook is properly positioned
in the peg board.
2. Push toward the lower left side and the
upper right side of the unit toward the peg
board, until the hook is embedded in the
slot and makes a "click" sound.
Wiring
diagram
●
If your air conditioner is provided with power cable, the wiring of the indoor
unit is connected in the factory, there is no need of connection.
●
If the power cable is not provided, connection is needed in accordance with
the wiring diagram.
Connector
If there is a connector,
connect it directly.
To Outdoor unit
1
2(N)
To Outdoor unit
4
1(L)
5
3
2(N)
To Outdoor unit
4
1(L)
5
3
2(N)
To Outdoor unit
1
2(N)
4
5
constant speed
Heat-pump type
To Outdoor unit
L
N
S
Variable speed
Cooling Only
Install Indoor Unit
NOTE:
※
This manual is usually includes the wiring mode for the different kind of A/C.
We cannot exclude the possibility that some special type of wiring diagrams
are not included.
※
The diagram are for reference only. If the entity is difference with this wiring
diagram, please refer to the detailed wiring diagram adhered on the unit which
you purchased.
- 17 -
Summary of Contents for Quadro ACE-35CH-FY BIO
Page 1: ...ACE 35CH FY BIO ...
