Eurocool FS-4045, User Manual

Page: 4 / 8

Direction of use
• Setting of wind direction
This fan can swing in up and down direction. The angle of facing upwards and downwards can be
adjusted by slightly lift or press the cover.
• Setting of shaking
Press the turning button and the head starts to rotate. Then pull it out and fan will stop rotating.
• Setting of wind speed and wind type
Pressing button of wind speed can adjust the speed of wind.
Solution to simple failure
When starting the fan, the fan blade doesn’t work. Please check wheter the power plug has really inserted
into the socket or the cover has disorted, which has touched the fan blade.
If sound the noise when starting the fan, please check the unit as follows:
1. Fan blade has been tight installed into the output shaft of motor.
2. Groove on back cover has matched the inserting groove on the output shaft.
3. There are tiny defective edge ring existing around the fan blade.
4. The cover has disorted, which has touched the fan blade.
Maintaining
Be sure to switch off the power supply and pull out the plug before cleaning.
1. This machine only needs common external cleaning and wiping.
2. Place into casing and store in the dry position.
Flow chart product
Technical Data
Model: FS-4045 Power Supply: AC 220V~ 50Hz Power: 4 2 W Fan diameter : 40cm
Environmentally-friendly treatment :
According to the EU Directive No 2002/96/EC concerning the products labeled with a symbol of a crossed trash
can, the manufacturer warns that this product cannot be considered a standard domestic waste. By proper
treatment, management and recycling of such waste the owner of the product prevents users from
the potential negative consequences to health, which may be caused by inadequate management
or disposal of such waste. For more information concerning recycling and management of the
product, please contact your local government office for dangerous waste management, or the
vendor from which you purchased the product. Waste electrical products must not be dispose with
household waste. This equipment should be taken to your local recycling centre for safe
treatment.
ENGLISH
- 3 -