EUROCOM M350C MILANO, Service Manual, Page: 45 / 103

Disassembly
2 - 22 Removing the Inverter
2.Disassembly
Removing the Inverter
1. Turn off the computer, remove the battery ( page 2 - 7 ).
2. Remove the rubber covers and screw - from the LCD ( Figure 16a ).
3. Run your finger around the middle of the frame to carefully unsnap the LCD front panel module from the back.
4. Remove screw from the inverter over and disconnect the cables & from the rear of the inverter .
5. Lift the inverter off the LCD assembly ( Figure 16d ).
5. LCD Front Panel
9. Inverter
• 4 Rubber covers
• 5 Screws
Figure 16
Inverter Removal
a. Remove the rubber cov-
ers and screws.
b. Unsnap the frame from
the LCD front panel
module.
c. Remove screw from in-
verter and disconnect
the cables.
c. Lift the inverter off the
LCD assembly.
1 4
5
6 7 8
9
1
2
a.
b.
3
9
c.
4
5
6
7
8
d.