EUROCOM D500P, Service Manual

Page: 53 / 134

Disassembly
Removing the Inverter 2 - 27
2.Disassembly
Removing the Inverter
1. Remove the battery ( page 2 - 7 ), bay one device ( page 2 - 8 ), hard disk assembly ( page 2 - 9 ), bay two device ( page
2 - 10 ), keyboard ( page 2 - 11 ) CPU ( page 2 - 13 ), palm rest ( page 2 - 17 ) and bottom case ( page 2 - 18 ).
2. Remove the rubber covers and screws - from the LCD ( Figure 2 - 25a ).
3. Run your finger around the middle of the frame to carefully unsnap the LCD front panel module from the back
( Figure 2 - 25b ).
4. Remove screw from the inverter, and disconnect cables & from the rear of the inverter ( Figure 2 - 25c ).
5. Lift the inverter off the LCD assembly ( Figure 2 - 25d ).
Figure 2 - 25
LCD Removal
Sequence
a. Remove the screws.
b. Unsnap the LCD
front panel from the
back.
c. Remove the screw
from the inverter.
d. Disconnect the ca-
bles and remove the
inverter.
1 6
7
8 9 10
11
2
1
4
3 5
6
a. b.
7
8
9
10
11
c.
d.
7. LCD Front Panel
11. Inverter
• 7 Screws