EUROCOM 2700-C User Manual Download Page 43

Page: 43 / 151

2 - 4

User’s Manual

Recharging by AC Power

The battery pack automatically recharges when plugged into an electrical

outlet. If the computer is powered on and in use it will take several hours to

fully recharge the battery. When the computer is turned off but plugged into

an electrical outlet, battery charge time is less. (Refer to LED Power Indicators

in this chapter for information on the battery charge status.)

Proper Handling of the Battery Pack

DO NOT disassemble the battery pack under any circumstances.

DO NOT expose the battery to fire or high temperatures, it may explode.

DO NOT connect the metal terminals (+, -) together. (For more information on

how to maintain the battery pack, refer to Chapter 3.)

Summary of Contents for 2700-C
























































































































































Search results

Summary of Contents for 2700-C

Reviews:

Related manuals for 2700-C

Brands by name

Popular brands

EUROCOM 2700-C, User Manual

Search results

Summary of Contents for 2700-C

Reviews:

Related manuals for 2700-C

Brands by name

Popular brands