Instruction Manual ZHK
V07-21.0
21/140
3 Reception control / unloading / transportation to installation site
Note:
Chapter 3.2 (Lifting by forklift / lift truck)
,
chapter 3.4 (Over lifting of AHU sections with
and
chapter 3.5 (Overlifting of monoblocs)
do not apply to flat AHUs (ceiling AHUs),
since they are not equipped with base frame.
3.1 Reception control
-
Upon arrival of the equipment, please check immediately that the package is intact, complete
and damage free.
-
Loose supplied parts and assembly materials are in a nylon bag or a specific box in the AHU.
-
If damage is found, immediately complete a damage report and send it to EUROCLIMA. Only
then can the transport company make a claim with the insurer (It is important to note the dam-
age on the shipping documents with date and signature in the presence of the carrier). Com-
plaints about apparent damaged or missing parts of the delivery cannot be subsequently ac-
cepted, if procedures are not followed. In case of complaints, please inform immediately the
EUROCLIMA office.
-
Depending on the material used and the environmental conditions, a superficial corrosion may
occur on components. For example, motor shafts, fan shafts, pulleys, clamping bushes, sheet
cutting edges, and so forth. The resulting corrosion layer protects the underlying material from
corroding further and does not represent a defect of the component or the device (see also
chapter 9 (Maintenance)
).
WARNING!
The packaged delivered goods may include multiple parts of the device. In this
case, each part is secured against falling over. Attention: narrow parts may tip
over after removing the safeguard. Secure narrow parts against tipping over!
WARNING!
Thin sheet metals and sharp edges, like roof edges or fins are a source of injury!
Gloves, safety shoes and long work clothes must be used.
NOTICE!
If climbing on the AHU is unavoidable during assembly, for example, for connect-
ing the roof plates, it must be undertaken by appropriate measures. For example,
using boards, that the weight is distributed evenly, in order to avoid bending of the
roof panels or causing dents and scratches
Figure 2:
Do not climb on the AHU!
Differentiation of delivery
For unloading, transporting and lifting an AHU to its final installation location, two fundamentally
different forms of delivery are to be differentiated.
Summary of Contents for ZHK
Page 1: ...ZHK INSTRUCTION MANUAL...
