Eurocave Modulotheque, Assembly Instructions Manual

Page: 20 / 60

6
GB
C
orner
P
edeStal
M
odule
(
mv
17 )
1
Locate the foot supports (C) (4 for the
first pedestal module and just 2 for every other
abutting pedestal) in the grooves provided and
align the foot support holes with those in the
wooden pedestal (A). Tighten the 2 screws (a) in
each foot support diagonally inside the pedestal
and lock off.
2
Place the module on the floor and check the
height of pedestal using a spirit level.
3
Place the rack (B) in its housing.
4
Place the module next to the previous one,
remembering that each corner module makes
a 45° curve. Position the foot supports of the
previous module in the grooves of the new
pedestal module.
5
Line up the holes and insert the 2 screws (a)
in the remaining free holes in each foot support.
6
Check the level of the assembly.
7
Place the rack (B) in its housing.
1st MoDULE
ADDitioNAL MoDULES
Warning !
take the size of the corner module into account before positioning the assembly.
FAStENiNGS
tooL REQUiRED
PARtS
ax8
A
B
Cx2
A
+ 2 foot supports for the 1st module (MV9)
C
B
1
2
3
B
4
5
6
7
a
a
B