Eurocave D-BEV-LVDUS, User Manual

Page: 13 / 16

13
GB
9 - o
PeratinG faults
When starting up
• The compressor does not work > check that the wall socket is
supplied with power by plugging in another electrical appliance.
Check if the cord is correctly connected into the inlet connector (located
at the back of the appliance).
• The compressor never stops > put your hand on the condenser (grill
located on the back of the appliance). If the condenser is cold, contact your
retailer.
If the condenser is hot, set your cabinet (ST1) to the maximum
temperature setting value. If the compressor still does not stop, contact
your retailer.
NB: Any work carried out by technical services not approved
by EuroCave shall render the warranty null and void.
The use of a glass door can affect the performance of your wine cabinet
in some extreme temperature conditions.
10 - e
nerGy and technical features
Model Temperature Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(Kg)
Accuracy
D-BEV-LVDUS
2 1825 680 690 92 +/- 3°F - 1,5°C
Electrical power*
(Watts)
Consumption
(kWh/ 24hrs)*
Voltage**
(V)
Frequency**
(Hz)
Recommended T° range
Min. T° Max. T°
110 0.900 115 60 54°F / 12°C 86°F / 30°C
Annual energy
consumption AEc***
(Kwh/year)
Useful
volume
(litres)
Acoustic
emissions
(dB(A))
329 445 38
* Measured with an external temperature of 77°F / 25°C.
** Depending on the country, these values can vary; to find out the specific properties of your appliance, consult your appliance’s product identification label.
*** Energy consumption calculated based on the result obtained over 24 hrs in standard test conditions. Actual energy consumption depends on the appliance’s
location and operating conditions.
This appliance is intended solely for storing wine.
Category of all models:2
Climate class: our appliances are designed to be used at an ambient temperature of 50°F - 90°F / 10°C - 32°C - Class SN – Nevertheless, refer to the table of technical
features above to find out the optimal performance for your product.
This model cannot be flush-fitted.