12
97
hEATiNg, hOT wATEr & Air CON
109-0006-08EN - 21/09
12.1.4
Selecting the operating modes using the Truma CP plus control element
(optional accessory)
The Truma CP plus control element (optional accessory) is installed in the area of the sliding door.
Rotary push button (Fig. 60, item 8) serves to select menus
or to change the values to be set.
)
Turn the rotary push button to the left or right to select a
menu item or to change the values.
)
Press the rotary push button to activate the menu item
or to save the setting.
)
Press the rotary push button for longer than 3 seconds
to switch the control element on or off.
Back button (Fig. 60, item 9) serves to switch back to the
previous menu or previous display.
10900026
1
6
2
3
5
4
8
7
9
1
Display
2
Status bar
3
Menu bar (top)
4
Menu bar (bottom)
5
Display mains voltage 230 Volt (power grid)
6
Display time switch
7
Settings/values
8
Rotary push button
9
Back button
Fig. 60
Truma CP plus control element (optional accessory)
NOTE!
You will find further information in the separate Operating Manual supplied by the device manufacturer.
12.2
Truma iNet system (optional accessory)
NOTE!
You will find further information in the separate Operating Manual supplied by the device manufacturer.
Summary of Contents for VANTourer 2021
Page 1: ...MANUAL www vantourer de From model year 2021 ...
Page 150: ...NOTES ...
Page 151: ...NOTES ...
Page 152: ...NOTES ...