3
Cooker
hood
4
Cooker
hood
USING
METHOD
Establishment of function
Press the switch of light to be on, the bulbs light on. Otherwise the bulbs don't work.
press the push button “1”or
“ ” or “I” or “ ” on, the motor runs at low speed.
Press the push button “2” or
“
”
or
“II”
or
“ ”
on, the motor runs at middle speed.
Press the push button “3” or
“
”
or
“III”
or
“ ”
on, the motor runs at high speed.
Press the push button “0” or
“ ”
or
“ ”
on, the motor stops running.
control
Electronism
EI
Mechanism
1
0
1
2
3
Model
:
1
Data
Power Supply:220-240V ~ 50Hz
Rating:280 watts
Light:Halogen 4 x 20 watts
Our policy is one of continual improvement in design and development,
therefore strict accuracy of illustrations and descriptions cannot be
guaranteed.
This appliance conforms to the
following EC Directive:
This appliance meets the provisions
Of the following directives:
2004/08/EC (electromagnetic compatibility), 2006/95/EC
(electrical equipment designed for use within certain voltage limits) as
amended.
Retention of this instruction book.
Keep this book in a handy place for reference.It contains important
details on the safe and proper use of your appliance.
This cooker hood must be earthed. It
must be put in the indeed earthed
socket.
Installation position and height
2
2
INSTALLATION
Please install the cooker hood at the dry place without direct sunlight.
There should be enough intensity and smooth and straight surface
about the metope which is used for fixing the cooker hood. Thus it can
make the cooker hood stable, without any shaking.
The cooker hood should be fixed right above and on the same axis as
the stove.
We recommend that after installation the bottom of the hood should
be not less than 650mm
and not more than 750mm
above the
stove's heating elements and burners.
Not more than 750mm
Not less than 650mm
