EURO EPZ4EESX Instructions And Advice For The Use, Installation And Maintenance Download Page 4

4

USE

FIG. 2

WARNINGS:

when the plate is switched on for the first time, or if it has remained unused for a long period, it should

be dried for 30 minutes on switch position n° 1. This will eliminate any moisture that may have been

absorbed by the insulating material.

To correctly use the appliance, remember:

- to place a pan on the plate before switching it on.

- To always use pans with flat and very thick bottoms (see fig. 2).

- To never use pans that are smaller than the plate diameters.

- To dry the bottom of the pan before placing it on the plate.

- Never leave the appliance unattended when the plates are being used. Particularly make sure that the

pan handles are safely positioned and keep a check on foods requiring oil and grease to cook, since

these products can easily catch fire.

- The machine must not be used by people (including children) with impaired mental or physical

capacities, or without experience of using electrical devices, unless supervised or instructed by an

expert adult responsible for their care and safety. Children should not be allowed to play with the

equipment.

- The plates will remain hot for a period of time after use. Never touch them with the hands or other objects

in order to prevent burns.

- Immediately disconnect the appliance from the electricity main if cracks are noted on the surfaces of

the plates.

- If the built-in hot plate has a lid, any spilt food should be immediately removed from this before

it is opened.

- If the appliance has a glass lid, this could shatter when the hot plate becomes hot. Always

switch off all the burners before closing the lid.

- The appliance must not be operated with an external timer or a separate remote-control system.

- Do not attempt to change the technical characteristics of the product because it can be

dangerous.

- If you should not to use this appliance any more (or replace an old model), before disposing of

it, make it inoperative in conformity with current law on the protection of health and the

prevention of environmental pollution by making its dangerous parts harmless, especially for

children who might play on an abandoned appliance.

Summary of Contents for EPZ4EESX













Reviews: