11
display
“
”
. Press “
” button again and the motor will stop
operating and
“
”
will disappear from LCD.
5.2.5
To set the clock, touch any button to enter standby mode.
Make sure that the “
” and “
” symbols are not displayed.
Press and hold “
” button for 2 to 3 seconds,
will be
displayed with the
flashing. Press “
” button to increase the
hour setting and press “
” to decrease the hour setting. Note: hour
can be set from 00 to 23.
When the correct hour is set, press “
” button. The second 2
segments of the LCD screen will flash. Press “
” button to
increase the minute setting and press “
” to decrease the minute
setting. Note: minutes can be set from 00 to 59.
When the correct time is displayed, press “
” button. The time is
now set and the Rangehood is in standby mode.
Once in time set mode after pressing and holding “
” button for 2
to 3 seconds, you must press “
” button two more times to exit
time set mode. While in time set mode, you cannot hold “
” button
for 2 to 3 seconds to re-enter time set mode, you must exit first.
5.2.6 To set the Timer for the Rangehood to switch off
automatically, press “
” button to set motor speed. The
Rangehood can be set to switch off after 1 – 60 minutes.
Press “
” button once, the LCD screen will display the last timer
setting in minutes. Press “
” button to increase the minutes, press
“
” button to decrease the minutes. Once the desired timer setting
is displayed, press “
” button to set the timer. The Rangehood will
continue to operate and the display will count down in minutes and
seconds. When the LCD display counts down to 0:00 the motor
