8
（
5
）
Instructions for Use – LCD Touch Control
1. Switch on the power to the Rangehood. The backlight is lit
displaying a 24 hour clock and the Rangehood is in standby
mode. The backlight disappears automatically after 30 seconds
if no icons are touched. When the backlight is not illuminated,
the Rangehood is off. Touch any key and the backlight will
illuminate.
2. To switch on the lights, touch any key to enter standby mode.
Touch key, the symbol will appear on the LCD screen.
Touch key it for a second time, the symbol will disappear
and the lights will switch off.
3. To operate the Rangehood, touch any key to enter standby mode.
1.
Touch key once, the symbol is displayed on the LCD
screen, and the motor starts operation. The motor operates
at low speed.
2.
Touch key once more at the low position, the
symbol is displayed on the LCD screen. The motor operates
at medium speed.
3.
Touch key once more at the medium position, the
symbol is displayed on the LCD screen. The motor
operates at high speed.
4.
There are only 3 speeds so if you continue to touch the
key at the high position, the
symbol is still
displayed and the motor will continue to operate at high
speed.
4. To reduce motor speed, touch
key once, the motor will
decrease speed to a lower position and the LCD screen displays
accordingly. If it is decreased continuously, then the motor
stops operation and enters standby mode. After 30 seconds, the
backlight disappears and the Rangehood is off.
