- If you do not have enough cans or bottles to fill your beverage cooler, it is
better to distribute them throughout the beverage cooler so as to avoid
“
all on
top” or “all below” type loads.
- Remove or relocate metal racks to accommodate large type of cans or
bottles where necessary.
- Keep small gaps between the wall and the cans or bottles to allow air
circulation.
- To facilitate air circulation, do not over load your beverage cooler.
- Avoid obstructing the internal fan (located inside on the back panel of the
beverage cooler)
- To prevent the cans or bottles from falling, do not try to slide the racks
outwards beyond the fixed position
- Do not pull out more than one loaded rack at a time as this may cause the
beverage cooler to tilt forward.
- Do not cover the metal racks with aluminium foil or other materials, as it will
obstruct air circulation
- Do not move your beverage cooler while it is loaded with beverages. This
may distort the main cabinet.
- Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
