EURO E120BCSS, Installation, Use & Maintenance Instruction Manual

Page: 8 / 12

An accurate maintenance guarantees good functioning and long-lasting performance.
* Particular care is due to the grease filter panel. It can be removed by pushing its special han-
dle toward the back-side of the cooker hood and turning the filter downwards so to unfasten
it from its slot (Fig.1).
To insert the filter just perform the opposite operation.
After 30 hours working the push button control panel will signal the saturation of the grease
filter by lighting all the buttons.
The grease filter needs cleaning by regular hand-washing or in dishwashers every two months
at least or depending on its use.
* To clean the appliance itself tepid water and neutral detergent are recommended, while
abrasive products should be avoided. For steel appliances specialized detergents are recom-
mended (please follow the instructions indicated o the product itself to obtain the desired
results).
* If the supply cord is damaged, it must be replaced by the manufacturer or its sevice agent or
a similarly qualified person in order to avoid a hazard.
To replace the bulbs in the square lights, press the light frame where it says “PUSH” (Fig. 6 and
Fig. 7), then replace the bulb and press the frame back into place.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
- MAINTENANCE GB
8