User’s Manual
EVD-16/400AxxHN
-54-
www.eurovideo-cctv.com
Channel: select the current camera channel.
Protocol: select corresponding PTZ protocol(such as PELCOD)
Address: default address is 1.
Baud rate: select corresponding baud rate. Default value is 9600.
Data bits: select corresponding data bits. Default value is 8.
Stop bits: select corresponding stop bits. Default value is 1.
Parity: there are three options: odd/even/none. Default setup is none.
Figure 4-28
After all the setting please click save button.
In one window display mode, right click mouse (click “Fn” Button in the front panel
or click “Fn” key in the remote control). The interface is shown as in
371H
Figure 4-29.
Figure 4-29
Click Pan/Tilt/Zoom, the interface is shown as below. See
372H
Figure 4-30.
Here you can set the following items:
Step: value ranges fro 1 to 8.
Zoom
Focus
Summary of Contents for EVD-16-400AxxHN
