Euro Video EVD-16/400A1HCB Installation And User Manual Download Page 17

Page: 17 / 96

Installation and User manual

EVD-16/400A16HCB

www.eurovideo-cctv.com

Menu Navigation

To enter the set-up menus, the user has to have the required access rights and be
logged on

press the Menu button or right click with mouse on screen and select the menu

icon. The following screen will be displayed.

Front Panel or IR remote control

First select the user name by pressing select key and using the up and down key.
Next, enter the password (default password is 00000000

– 8 zeros). Use the down key, up

key and select key. The following menu page will be displayed.

All menus are navigated around using the left / Right / Up / Down and the Select button.
To step back out of the menus press MENU button

Mouse control

Left clicking the mouse brings up the following display, from this right click on the menu icon
to display the password box, use the mouse to select the user name and enter the password.

Note: This display is also used to select Search mode, Turn on the telemetry
mode.

Summary of Contents for EVD-16/400A1HCB

































































































Search results

Summary of Contents for EVD-16/400A1HCB

Reviews:

Related manuals for EVD-16/400A1HCB

Brands by name

Popular brands

Euro Video EVD-16/400A1HCB, Installation And User Manual

Search results

Summary of Contents for EVD-16/400A1HCB

Reviews:

Related manuals for EVD-16/400A1HCB

Brands by name

Popular brands